Most Popular Key Features
Huawei is the most popular brand in the world, the company announced their latest P Smart+ (2019) smartphone.
Huawei P Smart+ (2019) smartphone comes with 64GB internal memory with 3GB RAM.
The device is powered by Android 9.0 (Pie); EMUI 9 operating system, that runs on GSM / HSPA / LTE technology. It was announced on 30 July 2018 and release date of the device is 05 August 2018.
The Dimensions of the smartphone is 155.2 x 73.4 x 8 mm (6.11 x 2.89 x 0.31 in) and weight is 160 g (5.64 oz). The latest device is Dual SIM supported.
P Smart+ (2019) display screen size is 6.21 inches, 94.7 cm2 (~83.1% screen-to-body ratio) and resolution of the device is 1080 x 2340 pixels, 19.5:9 ratio (~415 ppi density).
The latest smartphone is powered by Hisilicon Kirin 710 (12 nm) and device has powerful CPU such as Octa-core (4×2.2 GHz Cortex-A73 & 4×1.7 GHz Cortex-A53), with Mali-G51 MP4 GPU is also awesome.
The Rear Camera of the smartphone is Triple 24 Megapixels, PDAF + 16 Megapixels, (ultrawide) + 2 Megapixels, depth sensor LED flash, HDR, panorama , while Selfie Camera is 8 Megapixels HDR. Everyone want to need maximum selfie camera for pictures.
Unlock Bootloader on P Smart+ (2019) Using ADB Fastboot
No doubt that today we will help you that how to unlock the bootloader on Huawei P Smart+ (2019). Unlocking bootloader is a void that will effect on your device warranty. So we will not force you, do it on your own risk. Today we will guide you if would you like to install TWRP Recovery and if you want to root your smartphone. You must unlock the bootloader on your Huawei P Smart+ (2019). The following steps will help you to unlock the bootloader.
A bootloader is a software piece, it will automatically run on your Huawei P Smart+ (2019). Moreover, it is most important to have a functionality bootloader that starts up your device. That why bootloaders are stored in a stable memory away from your device reach. But don’t worry we are here to provide you some methods and solution for your Huawei P Smart+ (2019). We hope that these methods can help you to unlock bootloader your device. However, we highly recommend you to follow the steps very carefully step by step to avoid any permanent damage caused to your device.
You can void your warranty.
There will be issues with official OTA updates.
Moreover, you can brick your device or stuck in a boot loop if you do not follow the steps to unlock the bootloader carefully.
But, there are certain advantages once, you have unlocked the bootloader of your device;
You can install any custom ROM such as Lineage OS, Resurrection Remix ROM, and much more… You can root your Huawei P Smart+ (2019) smartphone.
You need a Windows Laptop/PC
Make sure that your device is charged more then 60% or your smartphone must be charge up to 60 percent.
Before we begin the unlocking of bootloader, we would strongly recommend you to create a backup of your device.
This is the method only for P Smart+ (2019) and you can for any other smartphone.
Steps to Unlock Bootloader of P Smart+ (2019)
As you know that we already mentioned above, you need to have an unlocked bootloader and you may install custom ROMs, restricted apps, on your device.
You should follow the below steps to unlock the bootloader of your device;
01: Enable Developer Options:
Go to Settings>> About device. Tap 7 times on Build number to enable Developer options.
02: Now, go back to the Developer Options.
03: Enable OEM Unlock.
To enable it, go to Settings>>Developer options>> Enable OEM Unlock
04: Turn OFF your device completely.
05: Download and set-up the ADB and Fastboot tools on our PC.
06: Now, you need to connect your smartphone to the PC via a USB cable.
07: Wait until all the USB Drivers get installed on your PC.
08: Now, head to the same folder where you have extracted the contents of the ADB and Fastboot tools, and open the CMD or command prompt.
09: Now, in the command prompt, enter the below command and press the Enter button on your keyboard;
10: The above command will show whether your device is detected by the PC and all the Fastboot drivers are installed correctly or not;
The output would be like: List of devices attached device (If your device’s serial number is listed in the list of connected devices then, you are good to go ahead. But, if your device’s serial number is not listed on the list then, you need to install all the drivers again)
11: Type the below command to enter the bootloader mode, and press Enter;
adb reboot bootloader
12: Now, enter the below command to unlock the bootloader of the P Smart+ (2019) device. Keep in mind that this step will wipe off the data on your smartphone;
fastboot flashing unlock
13: Your device will now ask you to confirm. You can confirm using the Volume buttons
14: Your device will now reboot.
15: That’s it! You have successfully unlocked the bootloader of the P Smart+ (2019) smartphone.
You can now go ahead and root your device and install various MODs, custom ROMs or modify the firmware of your device.
We hope that you have read all of the above steps carefully and now you can now go ahead and root your device and install various MODs, custom ROMs or modify the firmware of your device.
- How to install USB Drivers On your Android Device
- How to Enable USB Debugging Mode on your Android Device
- Secret Codes to unlock hidden features on your phone screen
- How to Root your Android smartphone without Computer
- How to install TWRP recovery on your Android Device
- Download SP Flash Tool on your Android Device
NOTE: Before we begin with the unlocking of bootloader, I would strongly recommend you to create a backup of your device. If anything goes wrong the author or getdroidpro.com are not responsible for it.