Connect
To Top

Archos 55 Access 3G Root using Magisk without TWRP Method

Today, here we will guide you on how to root your Archos 55 Access 3G using Magisk. In this method, you don’t need to TWRP of your device. It is a very simple and easy method, for everyone. We must recommend you please read the following steps carefully. If you don’t understand the below steps we also shared with you a video tutorial.

If you know about “Rooting” then, it is very easy, and you will root your Android device easily. A Lot of people don’t know about this. As you know that Android is an open-source OS that allows you to navigate your device as much as you can. You can do a lot of different things if the phone is rooted using Magisk Root. You may get access and control a lot of features such as a clock, access to the cache. You can also remove unwanted software from your Android 55 Access 3G. If your device is rooted then, you can run a firewall, enable a secure system on your device manually. Not only these but also you may back up your system, and a lot of different useful tweaks to get access. In this post, we will show you how to root Archos 55 Access 3G.

WHAT IS ROOTING?

Rooting is the process of allowing users of smartphones, tablets, and other devices running the Android mobile operating system to attain privileged control over various Android subsystems. As Android uses the Linux kernel, rooting an Android device gives similar access to administrative permissions as on Linux or any other Unix-like operating system such as FreeBSD or macOS [Source].

Now, we will guide you step by step, first of all, you will use the Magisk by patching the official stock boot image, and the flash on Archos 55 Access 3G boot partition. You must need to download the patched image file from Magisk Manager and flash it. A Lot of people don’t know and they compare rooting with hacking. Here we would like to clear you that rooting is a different thing and hacking different things. No doubt that someone may control and break any system using hacking that is illegal while rooting is done by the owner of an 55 Access 3G to get different features and advantages of the device.

How to Root Android With Magisk Without PC?

Video Tutorial

Quick Steps To Root Archos 55 Access 3G Using Magisk

Just Remember I just want to warn you that, Rooting will void the warranty of your smartphone
Rooting will block the OTA updates

Basic requirement

First of all, please check your device is charged more than 70%.
Please create a backup of your Android device before begin rooting.
This image file is only for Archos 55 Access 3G. Do not use it on any other Android device.
You need to connect the computer with a micro USB cable.
Finally, please check that you have downloaded all the required files on your computer.

Basic Downloads:

Download ADB and Fastboot files. (Windows/MAC)
Download And Install 55 Access 3G USB Drivers.
Download Other Drivers: Mediatek VCOM Drivers or MTK USB Drivers
Download Latest Archos 55 Access 3G Stock ROM
Download And Install SP Flash tool on your PC

How to Root Any Android Device without TWRP Recovery?

Video Tutorial
Disclaimer: We are at Getdroidpro will not be responsible for any bricking/damage to your phone while installing this ROM.

How To Root Using Patch Boot.image with Magisk?

Steps 1: First of all, please download and extract the ROM on your computer.
Steps 2: Now, connect your 55 Access 3G with a micro USB cable, and copy only the boot.img file from the extracted folder to your Archos 55 Access 3G device storage/memory.
Steps 3: Now you need to Launch Magisk Manager.
Steps 4: After that, you will see a popup window that will ask you to install Magisk.
Steps 5: Finally please select INSTALL and choose to install it again.
Steps 6: Now Please press on “Patch Boot Image File”.

How to Patch Stock Boot Image to install using Magisk

Steps 7: Navigate to internal storage and select your phone’s boot image that you transferred earlier.
Steps 8: Wait for a couple of seconds. Magisk will start patching the boot image.
Steps 9: Once the boot image has been patched, copy the “patched_boot.img” from the internal storage and replace it in the same extracted ROM folder on your PC.
Steps 10: Now you can follow the second step to flash the patched boot image file.

How To Install the Patched Boot Image on Archos 55 Access 3G

Follow the given link to install Patched Boot Image on Archos 55 Access 3G:
Suppose that you have downloaded the ADB & Fastboot tool from the above-given links.
First of all, you need to extract the ADB fastboot tool, now move the patched boot image to the same folder.
Then, right-click withholding the Shift key to open the command window / PowerShell.

Next, you need to enter the following commands step by step:
First of all, you need to Flash the “patched_boot.img” to install Magisk and root your Archos 55 Access 3G: fastboot flash boot patched_boot.img
You can also use the devices with A/B partition system, with the following commands:
fastboot flash boot_a patched_boot.img
fastboot flash boot_b patched_boot.img
After that, you need to replace [patched_boot.img] with the same boot image file that you have already downloaded with the .img.

Now you will see the flashing process have been started. Now, run fastboot and reboot

How to Verify if your Archos 55 Access 3G has a systemless root?

Download and install the Magisk Manager app APK, and launch it.
If you want to verify that you have a systemless root, check the top of the screen and if you see all options with Green Tick which means you have successfully rooted and bypassed SafetyNet.

Magisk Status check

So, that’s it. Now that you have rooted your Archos 55 Access 3G. If you have any queries regarding this, do let us know.

You May Also Like:

Archos 55 Access 3G Specs & Review

Archos 55 Access 3G comes with 8GB internal memory with 1GB Ram. It is powered by Android 7.0 (Nougat), it has powerful Quad-core 1.2 GHz Cortex-A7 CPU and Mediatek MT6580 chipset. The smartphone comes with 5.5 inches, 83.4 cm2 (~71.4% screen-to-body ratio) with 540 x 960 pixels, 16:9 ratio (~220 ppi density) resolution, and Non-removable Li-Ion 2000 mAh battery.

Archos 55 Access 3G comes primary camera is 8 Megapixels, LED flash, and secondary camera is 2 Megapixels. It has different sensors such as Accelerometer, proximity. The latest Archos 55 Access 3G coming with a lot of different features such as Wi-Fi 802.11 b/g/n, Wi-Fi Direct, hotspot, 4.0, A2DP, A-GPS, microUSB 2.0, USB On-The-Go.

Archos was announced their latest 55 Access 3G smartphone. It is powered by Android 7.0 (Nougat), which is run on GSM / HSPA technology, this device was announced on August 2017, and the release date of the device is 2017 August. The latest device consists on Dual SIM. 55 Access 3G comes with a 5.5 inches display with IPS LCD capacitive touchscreen, 16M colors, and 540 x 960 pixels resolution.

Note: You can comment on us anytime about Archos 55 Access 3G if you have any problems while rooting. If anything goes wrong the author or getdroidpro.com is not responsible for it.

Leave a Reply

Your email address will not be published. Required fields are marked *