Today, here we will guide you on how to root your Tecno Spark Plus K9 using Magisk. In this method, you don’t need to TWRP of your device. It is a very simple and easy method, for everyone. We must recommend you please read the following steps carefully. If you don’t understand the below steps we also shared with you a video tutorial.
If you know about “Rooting” then, it is very easy, and you will root your Android device easily. A Lot of people don’t know about this. As you know that Android is an open-source OS that allows you to navigate your device as much as you can. You can do a lot of different things if the phone is rooted using Magisk Root. You may get access and control a lot of features such as a clock, access to the cache. You can also remove unwanted software from your Android Spark Plus K9. If your device is rooted then, you can run a firewall, enable a secure system on your device manually. Not only these but also you may back up your system, and a lot of different useful tweaks to get access. In this post, we will show you how to root Tecno Spark Plus K9.
WHAT IS ROOTING?
Rooting is the process of allowing users of smartphones, tablets, and other devices running the Android mobile operating system to attain privileged control over various Android subsystems. As Android uses the Linux kernel, rooting an Android device gives similar access to administrative permissions as on Linux or any other Unix-like operating system such as FreeBSD or macOS [Source].
Now, we will guide you step by step, first of all, you will use the Magisk by patching the official stock boot image, and the flash on Tecno Spark Plus K9 boot partition. You must need to download the patched image file from Magisk Manager and flash it. A Lot of people don’t know and they compare rooting with hacking. Here we would like to clear you that rooting is a different thing and hacking different things. No doubt that someone may control and break any system using hacking that is illegal while rooting is done by the owner of an Spark Plus K9 to get different features and advantages of the device.
How to Root Android With Magisk Without PC?
Quick Steps To Root Tecno Spark Plus K9 Using Magisk
Just Remember I just want to warn you that, Rooting will void the warranty of your smartphone
Rooting will block the OTA updates
First of all, please check your device is charged more than 70%.
Please create a backup of your Android device before begin rooting.
This image file is only for Tecno Spark Plus K9. Do not use it on any other Android device.
You need to connect the computer with a micro USB cable.
Finally, please check that you have downloaded all the required files on your computer.
Download ADB and Fastboot files. (Windows/MAC)
Download And Install Spark Plus K9 USB Drivers.
Download Other Drivers: Mediatek VCOM Drivers or MTK USB Drivers
Download Latest Tecno Spark Plus K9 Stock ROM
Download And Install SP Flash tool on your PC
How to Root Any Android Device without TWRP Recovery?
Disclaimer: We are at Getdroidpro will not be responsible for any bricking/damage to your phone while installing this ROM.
How To Root Using Patch Boot.image with Magisk?
Steps 1: First of all, please download and extract the ROM on your computer.
Steps 2: Now, connect your Spark Plus K9 with a micro USB cable, and copy only the boot.img file from the extracted folder to your Tecno Spark Plus K9 device storage/memory.
Steps 3: Now you need to Launch Magisk Manager.
Steps 4: After that, you will see a popup window that will ask you to install Magisk.
Steps 5: Finally please select INSTALL and choose to install it again.
Steps 6: Now Please press on “Patch Boot Image File”.
Steps 7: Navigate to internal storage and select your phone’s boot image that you transferred earlier.
Steps 8: Wait for a couple of seconds. Magisk will start patching the boot image.
Steps 9: Once the boot image has been patched, copy the “patched_boot.img” from the internal storage and replace it in the same extracted ROM folder on your PC.
Steps 10: Now you can follow the second step to flash the patched boot image file.
How To Install the Patched Boot Image on Tecno Spark Plus K9
Follow the given link to install Patched Boot Image on Tecno Spark Plus K9:
Suppose that you have downloaded the ADB & Fastboot tool from the above-given links.
First of all, you need to extract the ADB fastboot tool, now move the patched boot image to the same folder.
Then, right-click withholding the Shift key to open the command window / PowerShell.
Next, you need to enter the following commands step by step:
First of all, you need to Flash the “patched_boot.img” to install Magisk and root your Tecno Spark Plus K9: fastboot flash boot patched_boot.img
You can also use the devices with A/B partition system, with the following commands:
fastboot flash boot_a patched_boot.img
fastboot flash boot_b patched_boot.img
After that, you need to replace [patched_boot.img] with the same boot image file that you have already downloaded with the .img.
Now you will see the flashing process have been started. Now, run fastboot and reboot
How to Verify if your Tecno Spark Plus K9 has a systemless root?
Download and install the Magisk Manager app APK, and launch it.
If you want to verify that you have a systemless root, check the top of the screen and if you see all options with Green Tick which means you have successfully rooted and bypassed SafetyNet.
So, that’s it. Now that you have rooted your Tecno Spark Plus K9. If you have any queries regarding this, do let us know.
You May Also Like:
- How to install USB Drivers on Tecno Spark Plus K9
- How to Enable USB Debugging Mode on your Tecno Spark Plus K9
- Secret Codes of your Tecno Spark Plus K9
- How to Root your Tecno Spark Plus K9 without using PC/Laptop
- How to install Custom TWRP Recovery on your Tecno Spark Plus K9
- Download SP Flash Tool for Tecno Spark Plus K9
Tecno Spark Plus K9 Specs & Review
Tecno Spark Plus K9 comes with 16GB internal memory with 2GB Ram. It is powered by Android 7.0 Nougat, it has powerful Quad-core 1.3 GHz Cortex-A53Quad-Core 1.3GHz Cortex-A53 CPU and MediaTek chipset. The smartphone comes with 6.0 inches, 95.9 cm2 (~81.2% screen-to-body ratio) with 720 x 1280 pixels, 16:9 ratio (~294 ppi density) resolution, and Non-removable Li-Ion 3400 mAh battery.
Tecno Spark Plus K9 comes primary camera is 13 Megapixels LED flash, and secondary camera is 5 Megapixels. It has different sensors such as Fingerprint (rear-mounted), accelerometer, proximity, compass. The latest Tecno Spark Plus K9 coming with a lot of different features such as Wi-Fi 802.11 b/g/n, hotspot, 4.2, A2DP, LE, A-GPS, microUSB 2.0.
Tecno was announced their latest Spark Plus K9 smartphone . It is powered by Android 7.0 Nougat, which is run on GSM / HSPA / LTE technology, this device was announced on 10 January, 2018, and the release date of the device is 12 January, 2018. The latest device consists on Dual SIM. Spark Plus K9 comes with a 6.0 inches display with IPS LCD capacitive touchscreen, 16M colors, and 720 x 1280 Pixels resolution.
Note: You can comment on us anytime about Tecno Spark Plus K9 if you have any problems while rooting. If anything goes wrong the author or getdroidpro.com is not responsible for it.