Connect
To Top

Free Download Plum Gator 3 Official USB Drivers

On this page, you’ll find four different USB drivers of your Plum Gator 3. Before download, you need to know that your device is powered by Android 6.0 (Marshmallow) that runs on GSM / HSPA / 2G / 3G technology. It was released on 10 November, 2016. The latest Gator 3 comes with 8GB internal memory with 1GB RAM. The device is 4.0 inches, 45.5 cm2 (~44.8% screen-to-body ratio) with 480 x 800 pixels, 5:3 ratio (~233 ppi density).
Gator 3 chipset is Mediatek MT6580 with Quad-core 1.3 GHz and Mali-400 graphics processing unit. If you are looking USB driver for your Plum Gator 3. You are the right place, here you can download a free USB driver, and we are here to guide you step by step. How to install a USB driver manually on your computer? Now we hope that you need to know how to enable USB Debugging Mode on your Plum Gator 3.

No doubt that today we always help you, how to install ABD, Qualcomm on Plum Gator 3? Here on this page, we will guide you on how to install ADB and Qualcomm drivers?
On this page, you can download the Gator 3 an official USB driver. Gator 3 smartphone is powered by Android 6.0 (Marshmallow), Mediatek MT6580 with processor Quad-core 1.3 GHz. Gator 3. If you find any issue, we are 24/7 available to help you. You can also check hidden secret codes of your Plum Gator 3 to unlock hidden features.

Plum Gator 3 CDC Driver for Flashing Firmware

Driver name: CDC Driver
Driver Size: 16.06KB
Download Now

How to Install CDC Driver Video Tutorial?

Video Tutorial

Download VCOM Driver of your Plum Gator 3 for Flashing Firmware

Driver name: VCOM Driver
Driver Size: 12.25KB
Download Now

How to Install a VCOM Driver Video Tutorial?

Video Tutorial

Plum Gator 3 ADB Driver for Normal Connecting

Driver name: ADB Driver
Driver Size: 8.28MB
Download Now

How to Install ADB Driver Video Tutorial?

Video Tutorial

Free Download Plum Gator 3 Qualcomm Driver for Flashing Firmware

Driver name: Qualcomm Driver
Driver Size: 10.99MB
Download Now

How to Install a Qualcomm Driver Video Tutorial?

Video Tutorial

How to Install Plum Gator 3 Driver manually?

Today we are going to share with you a few outstanding and easy steps to install ADB USB driver manually. Follow the below steps:

Step 1. First of all, Download and then extract the driver zip file in your computer (PC).
Step 2. You will open the Device Manager and click the “Add the Legacy Hardware Menu” Option and then click the “Next” button.
Step 3. Select install the hardware, you can select manually from the drop-down list.
Step 4. Locate the extracted driver manually on your computer screen and then click Add.
Step 5. Your Driver will install and listed in your device manager.

Driver Signature Error: If you are receiving any “Driver Signature Error” while installing any driver, you can watch the following video to fix those issues. We are 24/7 available to assist you to contact us anytime.

Driver Signature Error Video Tutorial

Video Tutorial

Related Posts:

Plum Gator 3 USB Drivers and How to install on your PC

How to Enable USB Debugging Mode on your Plum Gator 3

Plum Gator 3 Secret Codes to unlock hidden features

How to install TWRP recovery On Plum Gator 3

Download SP Flash Tool for your Plum Gator 3

NOTE: We always suggest you before start installing UBS Drivers on your PC/Laptop. You should create a backup of all your files and save them in a safe location. If anything goes wrong the author or getdroidpro.com is not responsible for it.

Leave a Reply

Your email address will not be published. Required fields are marked *