Summary of Aqua 4.5 Pro
Intex Aqua 4.5 Pro comes with 8GB memory with 1GB RAM, 4.5 inches display, resolution is 480 x 854 pixels and TFT capacitive touchscreen, 16M colors.
Intex Aqua 4.5 Pro comes with delicious colors such as Grey, White, Champagne, powerful battery, Removable Li-Po 1500 mAh battery with Wi-Fi 802.11 b/g/n, Wi-Fi Direct, hotspot, bluetooth 4.0, A2DP and A-GPS, GLONASS for best route.
How To Unlock Bootloader on Aqua 4.5 Pro
In this post we will guide you step by step how to unlock your device. But before we head-on with the step by step guide on how to unlock the bootloader of Aqua 4.5 Pro smartphone. Let us take a look at what is unlock bootloader and what advantages and disadvantages are there if you unlock the bootloader?
As you know that in this post we are publishing a full guide on on unlocking the bootloader. We give you lot of information to you, so that, you must be aware of bootloader and what are the advantages or the benefits you will get after unlocking it.
No doubt that a bootloader is a software piece. It is automatically runs on your Intex Aqua 4.5 Pro smartphone. Obviously, the bootloader commands of smartphone, it will indicate that what programs to load to make your phone run. No doubt, it is most important to bootloader as that starts up your smartphone.
This is the reason that bootloaders are stored in a stable memory that away from your device reach. We are here to provide you methods and solution for every device that will help you to unlock bootloader. Although, you must follow the steps very carefully to avoid any permanent damage caused to your device.
One thing to note is that unlocking your bootloader will void the warranty of your device. So, make sure that you are out of the warranty period or you are sure about what you are doing to your Intex Aqua 4.5 Pro smartphone.
Disadvantages with unlocking the bootloader;
You can void your warranty.
There will be issues with official OTA updates.
Moreover, you can brick your device or stuck in a boot loop if you do not follow the steps to unlock the bootloader carefully.
But, there are certain advantages once, you have unlocked the bootloader of your device;
We always guide you and off course you may install all kinds of custom ROM, TWRP Recovery, such as Lineage OS, Resurrection Remix ROM, much more…
Obviously, you can root your Aqua 4.5 Pro.
You can flash TWRP.
You need a Windows Laptop/Desktop
You must make sure that your device is charged up to 60% or more
We also advice you to take a complete backup of your device
This method is only for the Aqua 4.5 Pro and should be used for any other smartphone
Steps to Unlock Bootloader of Aqua 4.5 Pro
As we already mentioned above, about bootloader, you need to have an unlocked bootloader in order to install custom ROMs, restricted apps, etc on your Aqua 4.5 Pro. Please follow the below steps to unlock the bootloader of the device;
Follow the Steps one by one
1. Enable Developer Options: Go to Settings>>>>> About device. Tap 7 times on Build number to enable Developer options.
2. Now, go back to the Developer Options.
3. Enable OEM Unlock.
. To enable it, go to Settings>>>>>Developer options>>>>> Enable OEM Unlock
4. You will be asked for a full factory reset of your smartphone before the unlocking of your device. Make sure that you have backed-up all your data before proceeding with the steps.
5. After the bootloader is unlocked, your Aqua 4.5 Pro will reboot into system.
6. Again go to Developer Options and verify that the OEM Unlocking option is grayed out.
7. That’s it! Now you have successfully unlocked the bootloader of the Aqua 4.5 Pro.
You can now go ahead and root your device and install various MODs, custom ROMs or modify the firmware of your device.
So, there you have it from my side in this post. Hope you have followed the above-mentioned steps carefully and successfully unlocked the bootloader of your Aqua 4.5 Pro device.
Note that this is method is only for unlocking the Aqua 4.5 Pro smartphone. Please let us know in the comments section below if you have faced any issues while following the above-mentioned steps and also do report if you come across any link failure as well.
Most Popular Posts:
- How to install USB Drivers on your Intex Aqua 4.5 Pro
- How to Enable USB Debugging Mode on your Intex Aqua 4.5 Pro
- Secret Codes of your Intex Aqua 4.5 Pro
- How to Root your Intex Aqua 4.5 Pro without using PC/Laptop
- How to install Custom TWRP Recovery on your Intex Aqua 4.5 Pro
- Download SP Flash Tool of your Intex Aqua 4.5 Pro
NOTE: We always recommend you to create a backup of your device, such as images, video and all your files stored on safe location. We advice you that you must backup of your device on Google Drive or Dropbox. Unlocking of bootloader will wipe off the entire data on your Intex Aqua 4.5 Pro smartphone. We must read the following the steps very carefully because it will effect or avoid permanent damage or bricking of your device. If anything goes wrong the author or getdroidpro.com are not responsible for it.