Connect
To Top

How to Install Stock ROM On Vonino Jax QS Firmware

Vonino Jax QS

On this page, you will learn about how to install Stock ROM or Firmware [Flash File] on your Vonino Jax QS If you are facing any software error or any other application issue, don’t worry we have a solution for you. Now you can unbrick your phone or fix bootloop issues. How to root or install any MODs or Custom ROM, Custom Recovery, and you can upgrade your Jax QS using a Stock Firmware file. GetDroidPro always provides you a complete guidelines to resolve the issues.

In this post, you will learn a complete rooting method, and installing custom ROMs, Custom Recovery, MODs for your Vonino Jax QS. If you are the Android phone owner, and your phone out of order due to viruses, or you have downloaded any harmful application. So you can easily repair, and restore your Jax QS device using Stock ROM and Firmware Flash File.

Stock ROM On Vonino Jax QS Firmware File

First, you need to download the firmware file or the flashing software file on your computer/laptop. You should also need to download the important USB Driver on your computer for the firmware file process. Using SPD Flash Tool (Spreadtrum Flash Tool), you can install the Stock ROM on your Jax QS. Remember that these guidelines are also useful if you want to upgrade or downgrade the firmware on your Android device. The SPD flash tool will come in handy to flash the Stock ROM.
Note: We always suggest you before begin the flashing process, please carefully read all instructions for successful Stock ROM method applying.

Stock ROM Advantages:

You can Unbrick your Jax QS
To fix the boot loop problem
You can Upgrade and Downgrade Vonino Jax QS
To fix Bugs or Unroot on your Android device
To fix the lag or stutter on the Vonino Jax QS
You can Revert to stock to gain your warranty
You will be able to receive OTA Updates

Firmware Information:

Firmware Name: Vonino_Jax_QS_MT6582_20140426_4.2.2.ZIP
File Size: 446 MB
Download Official Stock ROM or Firmware
Download Now

How to Install Stock Firmware on the Vonino Jax QS

Following the basic requirements please install the appropriate necessary drivers and tools on your computer for boot loop, software error, update error, hanging, and dead issue.

Basic Requirements:

This Stock ROM file is only for Vonino Jax QS doesn’t try it on any other device.
Your computer must be in proper working condition and also check USB cable is properly connected with your computer.
Your Vonino Jax QS phone must be charged at least 70% or more.
Please make sure you have a complete backup of your Vonino Jax QS before starting the flashing process.
We also recommend installing the latest USB Drivers for Vonino Jax QS from the above given- link.

Required Downloads:

Download ADB and Fastboot files. (Windows )
Download And Install Jax QS USB Drivers.
Download Drivers: Mediatek VCOM Drivers or MTK USB Drivers
Download And Install SP Flash tool on your PC

How to flash Vonino Jax QS using SPD Upgrade Tool

  • 01: First, download the latest SPD Flash from the above-given link.
  • 02: Now, please check the update of the SpreadTrum driver on your phone. You need to install the latest version of the drivers.
  • 03: Please click on the Stock ROM / firmware file link from above particular as per your phone requirements.
  • 04: Now you need to extract the downloaded file on your computer.
  • 05: After that, please run the SpreadTrum Upgrade tool. [.exe]
  • 06: Then connect your device with PC, and switch off your Vonino Jax QS.
  • 07: After connecting your Android device, please Load Pocket and select PAC/PAC5 file for the connected device.
  • 08: Click / Select then “Start Downloading”
  • 09: Follow the instruction appears and continues the flashing.
  • 10: After this, your phone will reboot automatically which may take several minutes to reboot.
  • 11: And finally you will receive a pass message in green color.

Now you have successfully flashed your device.
We hope that the above-given procedure is easy to use and successful to install Stock Firmware on the Vonino Jax QS Spreadtrum-powered. If you have any issues or queries, feel free to ask in the comments below.

Flash your Vonino Jax QS device

1: First of all, you need to download and unzip the Stock ROM Firmware zip file on your computer.

2: After that, extracting the zip folder, you will find a Flash File, Flash Tool, USB Drivers, and Manual for flashing.

3: Then, you should need to install the USB Drivers on your computer, if USB Drivers are already installed on your PC, please SKIP this step.

4: Before installing please carefully read the manual and instructions to flash the Firmware on your Vonino Jax QS Device.

Follow Detailed Guidelines

Read Before Starting:
SP Flash Tool: If would you like to download the latest version of the SP Flash Tool, then you must head over to the SP Flash Tool for Windows or SP Flash Tool for the Linux page.

Backup creation: If you are going to flash the above Firmware on your Vonino Jax QS device. We always suggest you create a backup to prevent any data loss.

You May Also Like:

Note: You May Stock ROM on Vonino Jax QS Firmware, it is officially released by the company. If anything goes wrong the author is not responsible for it.

Leave a Reply

Your email address will not be published. Required fields are marked *