On this page, you will learn about how to download and install Stock ROM or Firmware for your Huawei Ascend P6 P6-U00 If you are facing any software error or any other application issue, don’t worry we have a solution for you. Now you can unbrick your phone or fix boot loop issues and how to root or install any mods or custom ROM and also you can upgrade your Ascend P6 P6-U00 using a Firmware file. Here we suggest you complete guidelines to resolve the issues.
Here, you have a method of rooting, installing custom ROMs, custom recovery, mods for your Huawei Ascend P6 P6-U00 If you are an Android user and your phone out of order due to viruses, or you have downloaded any harmful application, so you can easily repair, and restore your Ascend P6 P6-U00 device using Stock ROM.
Stock ROM On Huawei Ascend P6 P6-U00 Firmware File
First, you need to download the firmware file on your computer/laptop. You should also need to download the important USB Driver on your computer for the firmware file process. Using SPD Flash Tool (Spreadtrum Flash Tool), you can install the Stock ROM on Ascend P6 P6-U00. Remember that these guidelines are also useful if you want to upgrade or downgrade the firmware on your Android device. The SPD flash tool will come in handy to flash the Stock ROM.
Note: We always suggest you before begin the flashing process, please carefully read all instructions for successful Stock ROM method applying.
Stock ROM Advantages:
You can Unbrick your Ascend P6 P6-U00
To fix the boot loop problem
You can Upgrade and Downgrade Huawei Ascend P6 P6-U00
To fix Bugs or Unroot on your Android device
To fix the lag or stutter on the Huawei Ascend P6 P6-U00
You can Revert to stock to gain your warranty
You will be able to receive OTA Updates
Please follow the step one by one properly and you must arrange all requirements, download links, and firmware details before start the flashing process.
Firmware File Name: Huawei_Ascend_P6_P6-U00_M00010_Board_Software_HMT.zip
File Size: 291 MB
Download Official Stock ROM or Firmware
How to Install Stock Firmware on the Huawei Ascend P6 P6-U00
Following the basic requirements please install the appropriate necessary drivers and tools on your computer for bootloop, software error, update error, hanging, and dead issue.
This Stock ROM file is only for Huawei Ascend P6 P6-U00 doesn’t try it on any other device.
Your computer must be in proper working condition and also check USB cable is properly connected with your computer.
Your Huawei Ascend P6 P6-U00 phone must be charged at least 70% or more.
Please make sure you have a backup of your device before starting the flashing process.
We also recommend installing the latest USB Drivers for Huawei Ascend P6 P6-U00 from the above given- link.
If you want to install any CUSTOM ROM on Ascend P6 P6-U00 , you must Unlock Bootloader on your phone. The bootloader allows you to Root your Android device, Flash TWRP and Custom ROM.
How to flash Huawei Ascend P6 P6-U00 using SPD Upgrade Tool
- 01: First, download the latest SPD Flash from the above-given link.
- 02: Now, please check the update of the SpreadTrum driver on your phone. You need to install the latest version of the drivers.
- 03: Please click on the Stock ROM / firmware file link from above particular as per your phone requirements.
- 04: Now you need to extract the downloaded file on your computer.
- 05: After that, please run the SpreadTrum Upgrade tool. [.exe]
- 06: Then connect your device with PC, and switch off your Huawei Ascend P6 P6-U00.
- 07: After connecting your Android device, please Load Pocket and select PAC/PAC5 file for the connected device.
- 08: Click / Select then “Start Downloading”
- 09: Follow the instruction appears and continues the flashing.
- 10: After this, your phone will reboot automatically which may take several minutes to reboot.
- 11: And finally you will receive a pass message in green color.
Now you have successfully flashed your device.
We hope that the above-given procedure is easy to use and successful to install Stock Firmware on the Huawei Ascend P6 P6-U00 Spreadtrum-powered. If you have any issues or queries, feel free to ask in the comments below.
Flash your Huawei Ascend P6 P6-U00 device
1: First of all, you need to download and unzip the Stock ROM Firmware zip file on your computer.
2: After that, extracting the zip folder, you will find a Flash File, Flash Tool, USB Drivers, and Manual for flashing.
3: Then, you should need to install the USB Drivers on your computer, if USB Drivers are already installed on your PC, please SKIP this step.
4: Before installing please carefully read the manual and instructions to flash the Firmware on your Huawei Ascend P6 P6-U00 Device.
Read Before Starting:
SP Flash Tool: If would you like to download the latest version of the SP Flash Tool, then you must head over to the SP Flash Tool for Windows or SP Flash Tool for the Linux page.
Backup creation: If you are going to flash the above Firmware on your Huawei Ascend P6 P6-U00 device. We always suggest you create a backup to prevent any data loss.
- How to Unlock Bootloader On Your Huawei Ascend P6 P6-U00
- Top Best Cloud Storage Platforms For Your Huawei Ascend P6 P6-U00
- Huawei Ascend P6 P6-U00 USB Drivers | How To Install Drivers On Windows Manually?
- How to Enable USB Debugging and Developer Mode on your Huawei Ascend P6 P6-U00
- Huawei Ascend P6 P6-U00 Secret Codes to unlock hidden features
- How to Root your Android smartphone without Computer
- How to TWRP recovery and Custom Recovery On Your Huawei Ascend P6 P6-U00
- Download SP Flash Tool For Your Huawei Ascend P6 P6-U00
Note: You May Stock ROM on Huawei Ascend P6 P6-U00 Firmware, it is officially released by the company. If anything goes wrong the author is not responsible for it.