In this post, you will learn how to enable developer options and USB debugging on your HTC Desire 19 plus. If you wanna connect your phone with a Computer or Laptop, make sure that USB debugging must be enabled on your HTC Desire 19 plus. No doubt that enabling USB debugging was very easy in the previous version of Android devices. Here we will guide step by step, how to enable developer option and USB debugging on Desire 19 plus.
HTC Desire 19 plus Full Specifications
HTC Desire 19 plus smartphone is powered by Android 9 (Pie) which runs on GSM / HSPA / LTE technology. This device was released on 17 July 2019. The Latest Desire 19 plus comes with 64GB internal memory with 4GB ram and device screen size is 6.2 inches, 99.2 cm2 (~84.9% screen-to-body ratio) and 720 x 1440 pixels, 18:9 ratio (~260 ppi density) resolution.
The device comes with 13 Megapixel, f/1.8, 1/3″8 Megapixel, 1.12µm, PDAF 2 Megapixel, depth sensor rear camera, and 16 Megapixel , f/2.0 selfie camera. HTC Desire 19 plus is powered by Mediatek MT6765 Helio P35 (12nm) chipset with Octa-core (4×2.3 GHz Cortex-A53 & 4×1.8 GHz Cortex-A53) CPU and GPU is PowerVR GE8320.
The HTC Desire 19 plus has a Non-removable Li-Ion 3850 mAh battery and Connectivity options are Wi-Fi 802.11 a/b/g/n/ac, dual-band, Wi-Fi Direct, hotspot, 5.0, A2DP, LE bluetooth, Yes, with A-GPS, 2.0, Type-C 1.0 reversible connector and sensors are Fingerprint (under display), accelerometer, gyro, proximity, compass.
How to enable developer mode in your HTC Desire 19 plus
Today we will share with you very simple steps, you may easily enable or activate hidden developer mode using system settings on any Android device. You need to create a backup your Android device and save it in safe locations.
01: First, Go to settings ->>> select system settings. See the below image:
02: Now on your HTC Desire 19 plus device jut Go to ->>> About Phone. See the below image:
03: Now, Scroll down of screen, and find the Build Number your HTC Desire 19 plus Press it 7 to 10 times. See the below image:
04: After a few minutes HTC Desire 19 plus Now, you will see this a pop-message: You are now a developer! See the below image:
05: Now Click on ->>> Back Tap Button and you will see developer options under system settings. See the below image:
We advise you that follow the steps carefully otherwise your HTC Desire 19 plus turns off during enable developer mode option.
How to Enable USB debugging on HTC Desire 19 plus
You can transfer your Desire 19 plus all images, videos and, other documents to your Computer Using Enable USB debugging Mode Option.
01: Go to Settings on your HTC Desire 19 plus smartphone.
02: Now, Select From Settings option ->>>> About phone then Select ->>>> Software Information.
03: Now Scroll Down screen, and Tap the Build Number 7 to 10 times, on your Desire 19 plus, you will receive a message “Developer mode has been enabled”.
Now, you have successfully enabled USB debugging mode on HTC Desire 19 plus
- How to install USB Drivers on HTC Desire 19 plus
- How to Enable USB Debugging Mode on your HTC Desire 19 plus
- Secret Codes for your HTC Desire 19 plus
- How to Root your HTC Desire 19 plus without using PC/Laptop
- How to install Custom TWRP Recovery on your HTC Desire 19 plus
- Download SP Flash Tool for HTC Desire 19 plus
Note If anything goes wrong the author or getdroidpro.com is not responsible for it.