How to Install TWRP Recovery on Android 10 or any Smartphone

Requirements:

  • Before begin, please make sure that your device is unlocked bootloader.
  • Have you installed ADB and Fastboot on PC/Laptop with all drivers?
  • Make sure that your device is charged more then 60% or your phone must be charged up to 60 percent.
  • You must download the latest version of the TWRP 3.3.0-0 Recovery by clicking this page, link and then scrolling down to find your supported device.

Guide step by step:

1.  First of all, download the latest version of the TWRP Recovery and move it into the same folder where is your ADB and Fastboot are available. Then please rename this file to simpler such as recovery.img for the future convenience.
2.  Now please right click your mouse with the shift key, then go to the menu and select Open Command Prompt.
3.  Next, you should boot your device into fastboot mode, you may use the following keys. Press the Power Button and Volume Up keys both at the same time).
4.  After that, connect it with your PC/laptop, and type the following command to confirm the connection :
fastboot devices
5.  If everything’s fine, you should see your device connected in Fastboot mode with a serial identifier next to it.
6.  Now, proceed with installing the recovery using the following command :
fastboot flash recovery recovery.img
(First Replace the filename that you have downloaded and remember what you have saved)
7.  For devices with an A/B partition, you can’t flash the recovery to the system partition permanently. You will have to manually boot into the recovery every time you want to use it. For that, enter the following command:
fastboot boot recovery.img
(First Replace the filename that you have downloaded and remember what you have saved)
8.  Once done, type in the following command to boot directly into the recovery mode:
ADB reboot recovery

To Install TWRP 3.3.0-0 Recovery on Your Smartphone using TWRP Recovery Method

We always recommended the following steps to install TWRP 3.3.0-0 on your Android device quickly. If you would like to update from an existing TWRP Recovery. Please make sure that you have a stable build of TWRP running on your phone to target the update file.

1.  First of all, download the latest version of the TWRP 3.3.0-0 Recovery and transfer the file into the root of your internal memory.
2.  Now, you should boot your device using recovery mode, a lot of peoples do this by pressing the Power and Volume Down keys both at the same time).
3.  Now carefully to Install, and select Install Image from the below option.
4.  After that, you’ll see all images available on your Android device. Now, you know that your target recovery file should show up there.
5.  Press on it, and swipe to confirm the flash.
6.  You may reboot to get the updated recovery by headline over the Reboot menu, and tapping on Recovery.

That’s it! I hope that you’ve successfully flashed your Android device, and you have got the latest TWRP recovery. We are available to support you 24/7, and we would like to help you more and more. Thank you for reading.

[NOTE:] Please read carefully before the start. Follow the steps very carefully to avoid permanent damage or bricking of your device. If anything goes wrong the author is not responsible for it.

Leave a Comment

Your email address will not be published.