Connect
To Top

12 Easy steps to Unlock Bootloader your Kyocera Digno g (2017)

Most Popular Key Features

Brand: Kyocera
Model: Digno g (2017)
OS: Android 7.1
CPU: Quad-core 1.4 GHz
Memory: 16GB
RAM: 2GB
Screen: 5.0 inches
Rear Camera: 13 MP
Front Camera: 2 MP
Battery: 2300 mAh

In this post we will guide you step by step, how to unlock the bootloader on Kyocera Digno g (2017). The smartphone comes with 16GB phone memory and 2GB RAM. Kyocera Digno g (2017) smartphone is powered by Qualcomm Snapdragon 425 MSM8917, the device has powerful CPU is Quad-core 1.4 GHz Cortex-A53 and GPU is Adreno 308. This device has Non-removable Li-Po 2300 mAh battery.

How To Unlock The Bootloader on Kyocera Digno g (2017), full guide step by step

We will help you that how to unlock the bootloader on Kyocera Digno g (2017). Unlocking bootloader is a void that will effect on your device warranty. So we will not force you, do it on your own risk. Today we will guide you if would you like to install TWRP Recovery and if you want to root your smartphone. You must unlock the bootloader on your Kyocera Digno g (2017). The following steps will help you to unlock the bootloader.
A bootloader is a software piece, it will automatically run on your Kyocera Digno g (2017). Moreover, it is most important to have a functionality bootloader that starts up your device. That why bootloaders are stored in a stable memory away from your device reach. But don’t worry we are here to provide you some methods and solution for your Kyocera Digno g (2017). We hope that these methods can help you to unlock bootloader your device. However, we highly recommend you to follow the steps very carefully step by step to avoid any permanent damage caused to your device.
You can void your warranty.
There will be issues with official OTA updates.
Moreover, you can brick your device or stuck in a boot loop if you do not follow the steps to unlock the bootloader carefully.
But, there are certain advantages once, you have unlocked the bootloader of your device;

Related Posts:

You can install any custom ROM such as Lineage OS, Resurrection Remix ROM, and much more… You can root your Kyocera Digno g (2017) smartphone.
You can flash TWRP.

Basic Requirements

You need a Windows Laptop/PC
Make sure that your device is charged more then 60% or your smartphone must be charge up to 60 percent.
Before we begin the unlocking of bootloader, we would strongly recommend you to create a backup of your device.
This is the method only for Digno g (2017) and you can for any other smartphone.
Steps to Unlock Bootloader of Digno g (2017)
As you know that we already mentioned above, you need to have an unlocked bootloader and you may install custom ROMs, restricted apps, on your device.
You should follow the below steps to unlock the bootloader of your device;

Follow the Below Steps to Unlock Bootloader

Step 1: Firstly, you need to enable the Developer Options on your Digno g (2017).
Then go to Settings>>>>>>>>About Phone>>>>>>>> and press the Build Number 6 to 7 times until you see a pop message that show you “You are now a developer”.
Into the Developer Options, now you need to enable USB Debugging and the OEM Unlock option.
After that again head to the Settings>>>>Developer Options>>>>enable USB Debugging and OEM Unlock.
Step 2: Download and setup the ADB and Fastboot tools on your Laptop or Desktop.
Step 3: Now, I would like to request you please connect your Digno g (2017) to Laptop/PC using a USB cable.
Step 4: Now, you should wait until all the USB Drivers installed on your Computer.
Step 5: Now open the CMD or command prompt and go to the same folder, where you have extracted the contents of the ADB and Fastboot tools.
Step 6: After that, please type the below command into the command prompt area and press the Enter button;
ADB devices
Step 7: Suddenly, You will see a popup message on your smartphone such as “Always allow from this computer”. Now You can press OK button.
Step 8: In this step you should type the below command to enter the bootloader mode, and press Enter; button on your keyboard.
adb reboot bootloader
Step 9: Now, you must enter the below command so your Digno g (2017) and you will reboot into Fastboot mode;
fastboot flashing unlock
Step 10: Now, enter again your device into the Fastboot mode using the Volume Down + Power button together.
Step 11: After that please enter the below command;
fastboot flashing unlock_critical
Step 12: That’s It! You have successfully unlocked the bootloader of the Kyocera Digno g (2017) device.
We hope that you have read all of the above steps carefully and now you can now go ahead and root your device and install various MODs, custom ROMs or modify the firmware of your device.
NOTE: Before we begin with the unlocking of bootloader, I would strongly recommend you to create a backup of your Kyocera Digno g (2017) .
Unlocking of bootloader will wipe off the entire data on your device. Moreover, we advised you to follow the above steps very carefully to avoid permanent damage or bricking of your device. getdroidpro.com is not responsible for anything.

Leave a Reply

Your email address will not be published. Required fields are marked *