Samsung Galaxy M01 Core comes with 32GB internal memory with 2GB Ram. It is powered by Android 10 (Go edition), it has powerful Quad-core 1.5 GHz Cortex-A53 CPU and Mediatek MT6739 (28 nm) chipset. The smartphone comes with 5.3 inches, 71.3 cm2 (~74.5% screen-to-body ratio) with 720 x 1480 pixels, 18.5:9 ratio (~311 ppi density) resolution, and Li-Ion 3000 mAh, non-removable. Samsung Galaxy M01 Core comes primary camera is 8 Megapixel, f/2.2, AF, and secondary camera is 5 Megapixel, f/2.4. It has different sensors such as Accelerometer. The latest Samsung Galaxy M01 Core coming with a lot of different features such as Wi-Fi 802.11 b/g/n, Wi-Fi Direct, hotspot, 5.0, A2DP, LE, Yes, with A-GPS, microUSB 2.0.
Samsung was announced their latest Galaxy M01 Core is powered by Android 10 (Go edition), which is run on GSM / HSPA / LTE technology, this device was announced on 21 July 2020, and the release date of the device is 29 July 2020.
How To Unlock The Bootloader on Samsung Galaxy M01 Core, full guide step by step
We will guide you on how to unlock the bootloader on Samsung Galaxy M01 Core. Unlocking bootloader is a void that will affect your device warranty. So we will not force you, do it on your own risk. Today we will guide you if would you like to install TWRP Recovery and if you want to root your smartphone . You must unlock the bootloader on your Samsung Galaxy M01 Core. The following steps will help you to unlock the bootloader.
What Is Bootloader Or Boot Manager?
Bootloader or Boot manager is a small software programming code that is used to initiate your android smartphone, it is stored in the operating system of a device into memory. Bootloader guides your Samsung Galaxy M01 Core that which programs should be load in start-up and how to find system kernel of your device. As we know every smartphone which is powered by OS (Operating System) must contain the Bootloading option. Android is a product of Google which is used in smartphones across worldwide and Android making changes, developing operating systems time to time with latest upgraded features, android makes changes by the manufacturers according to their choice, and manufacturers also make changes in features and specifications in their phones to gain maximum local market interest. So every rooting procedure cannot be the same.
We hope that these methods can help you to unlock bootloader your device. However, we highly recommend you follow the steps very carefully, step by step to avoid any permanent damage caused to your device.
You can void your warranty
There will be issues with official OTA updates
Moreover, you can brick your device or stuck in a boot loop
But, there are certain advantages once, you have unlocked the bootloader on your device
You can install any custom ROM such as Lineage OS, Resurrection Remix ROM. You can also root your Samsung Galaxy M01 Core smartphone .
You can flash TWRP.
How to Unlock Bootloader Video Tutorial?
You need a Windows Laptop/PC
Your device must be charged more than 70% or your smartphone must be charged up to 70 percent
Before we begin the unlocking of bootloader, we would strongly recommend you to create a backup of your device
This is the method only for Galaxy M01 Core and you can for any other smartphone
Steps to Unlock Bootloader of Galaxy M01 Core
As you know that we already mentioned above, you need to have an unlocked bootloader and you may install Custom ROMs, restricted apps, on your device
You should follow the below steps to unlock the bootloader of your device
12 Quick Steps to Unlock The Bootloader
1: Firstly, you need to enable the Developer Options on your Galaxy M01 Core.
Go to Settings>>>>>>>>About Phone>>>>>>>> and press the Build Number 6 to 7 times until you see a pop message that shows you “You are now a developer”.
2: Download and setup the ADB and Fastboot tools on your Laptop or Desktop.
3: Now, connect your Galaxy M01 Core to Laptop/PC using a USB cable.
4: Now, you should wait until all the USB Drivers installed on your computer.
5: Now open the CMD or command prompt and go to the same folder, where you have extracted the contents of the ADB and Fastboot tools.
6: After that, type the below command into the command prompt area and press the Enter button;
7: You will see a popup message on your smartphone such as “Always allow from this computer”. Now You can press the OK button.
8: You should type the below command to enter the bootloader mode, and press Enter; button on your keyboard.
adb reboot bootloader
9: Now, you must enter the below command so your Galaxy M01 Core and you will reboot into Fastboot mode;
fastboot flashing unlock
10: Now, enter again your device into the Fastboot mode using the Volume Down + Power button together.
11: After that, enter the below command;
fastboot flashing unlock_critical
Step 12: That’s It! You have successfully unlocked the bootloader of the Samsung Galaxy M01 Core device.
We hope that you have read all of the above steps carefully, and now you can go ahead, and root your device and install various MODs, custom ROMs or modify the firmware of your device.
- Best Way To Unlock Bootloader your Samsung Galaxy M01 Core
- Top Best Cloud Storage Apps For Your Samsung Galaxy M01 Core
- Download and install USB Driver On Your Samsung Galaxy M01 Core
- Samsung Galaxy M01 Core Enable USB Debugging Mode a complete guide
- Unlock Hidden Features On Your Samsung Galaxy M01 Core Secret Codes
- How to Root your Android smartphone without Computer
- How to TWRP recovery and Custom Recovery On Your Samsung Galaxy M01 Core
- Download SP Flash Tool For Your Galaxy M01 Core
Note: You begin the unlocking of bootloader, we would strongly recommend you create a backup your Samsung Galaxy M01 Core.
Unlocking of bootloader will wipe off the entire data on your device. We advised you to follow the above steps very carefully to avoid permanent damage or bricking of your device. getdroidpro.com is not responsible for anything.