Haier Alpha A7 Enable Developer Option and USB Debugging

In this post, you will learn how to enable developer options and USB debugging on your Haier Alpha A7. If you wanna connect your phone with a Computer or Laptop, make sure that USB debugging must be enabled on your Haier Alpha A7. No doubt that enabling USB debugging was very easy in the previous version of Android devices. Here we will guide step by step, how to enable developer option and USB debugging on Alpha A7.

Haier Alpha A7 Full Specifications

Haier Alpha A7 smartphone is powered by Android 8.1 Oreo which runs on GSM / HSPA / LTE technology. This device was released on 20 December 2018. The Latest Alpha A7 comes with 16GB internal memory with 2GB ram and device screen size is 5.7 inches, 83.8 cm2 (~75.4% screen-to-body ratio) and 720 x 1440 pixels resolution.

The device comes with Dual 16 Megapixels + 2 Megapixels Autofocus, LED flash rear camera, and 8 Megapixels f/2.0 30fps selfie camera. Haier Alpha A7 is powered by MediaTek MT6739WA, 28nm, 64 bit chipset with Quad-core 1.3 GHz Cortex-A53 CPU and GPU is PowerVR GE8100.

The Haier Alpha A7 has a Non-removable Li-Po 3000 mAh battery and Connectivity options are Wi-Fi 802.11 b/g/n, WiFi Direct, hotspot, 4.2, A2DP, LE bluetooth, A-GPS, GLONASS, BDS, microUSB 2.0, USB and sensors are Accelerometer Proximity Light.

Download Latest Haier Alpha A7 USB, Drivers

Haier Alpha A7 Secret Codes to unlock hidden features

How to enable developer mode in your Haier Alpha A7

Today we will share with you very simple steps, you may easily enable or activate hidden developer mode using system settings on any Android device. You need to create a backup your Android device and save it in safe locations.

01: First, Go to settings ->>> select system settings. See the below image:

How to enable developer mode step 1 System settings

02: Now on your Haier Alpha A7 device jut Go to ->>> About Phone. See the below image:

step 2 click on about phone option

03: Now, Scroll down of screen, and find the Build Number your Haier Alpha A7 Press it 7 to 10 times. See the below image:

How to enable developer mode step 3 select Build number 7 to 10 times

04: After a few minutes Haier Alpha A7 Now, you will see this a pop-message: You are now a developer! See the below image:

How to enable developer mode

05: Now Click on ->>> Back Tap Button and you will see developer options under system settings. See the below image:

Turn on hidden developer options

We advise you that follow the steps carefully otherwise your Haier Alpha A7 turns off during enable developer mode option.

How to Enable USB debugging on Haier Alpha A7

You can transfer your Alpha A7 all images, videos and, other documents to your Computer Using Enable USB debugging Mode Option.

01: Go to Settings on your Haier Alpha A7 smartphone.

02: Now, Select From Settings option ->>>> About phone then Select ->>>> Software Information.

03: Now Scroll Down screen, and Tap the Build Number 7 to 10 times, on your Alpha A7, you will receive a message “Developer mode has been enabled”.

Now, you have successfully enabled USB debugging mode on Haier Alpha A7

Related Posts:

Note If anything goes wrong the author or getdroidpro.com is not responsible for it.

Leave a Reply

Your email address will not be published. Required fields are marked *