Fly Memory Plus Enable Developer Option and USB Debugging

In this post, you will learn how to enable developer options and USB debugging on your Fly Memory Plus. If you wanna connect your phone with a Computer or Laptop, make sure that USB debugging must be enabled on your Fly Memory Plus. No doubt that enabling USB debugging was very easy in the previous version of Android devices. Here we will guide step by step, how to enable developer option and USB debugging on Memory Plus.

Fly Memory Plus Full Specifications

Fly Memory Plus smartphone is powered by Android 7.0 (Nougat) which runs on GSM / HSPA / LTE technology. This device was released on 31 December 2017. The Latest Memory Plus comes with 16GB internal memory with 2GB ram and device screen size is 5.0 inches, 68.9 cm2 (~67.9% screen-to-body ratio) and 720 x 1280 pixels, 16:9 ratio (~294 ppi density) resolution.

The device comes with 8 Megapixels, autofocus, LED flash rear camera, and 5 Megapixels selfie camera. Fly Memory Plus is powered by Spreadtrum SC9832 chipset with Quad-core 1.4 GHz Cortex-A53 CPU and GPU is Mali-T720MP2.

The Fly Memory Plus has a Removable Li-Ion 2100 mAh battery and Connectivity options are Wi-Fi 802.11 b/g/n, hotspot, 4.0, A2DP bluetooth, A-GPS, microUSB 2.0 and sensors are Accelerometer, proximity, compass.

Download Latest Fly Memory Plus USB, Drivers

Fly Memory Plus Secret Codes to unlock hidden features

How to enable developer mode in your Fly Memory Plus

Today we will share with you very simple steps, you may easily enable or activate hidden developer mode using system settings on any Android device. You need to create a backup your Android device and save it in safe locations.

01: First, Go to settings ->>> select system settings. See the below image:

How to enable developer mode step 1 System settings

02: Now on your Fly Memory Plus device jut Go to ->>> About Phone. See the below image:

step 2 click on about phone option

03: Now, Scroll down of screen, and find the Build Number your Fly Memory Plus Press it 7 to 10 times. See the below image:

How to enable developer mode step 3 select Build number 7 to 10 times

04: After a few minutes Fly Memory Plus Now, you will see this a pop-message: You are now a developer! See the below image:

How to enable developer mode

05: Now Click on ->>> Back Tap Button and you will see developer options under system settings. See the below image:

Turn on hidden developer options

We advise you that follow the steps carefully otherwise your Fly Memory Plus turns off during enable developer mode option.

How to Enable USB debugging on Fly Memory Plus

You can transfer your Memory Plus all images, videos and, other documents to your Computer Using Enable USB debugging Mode Option.

01: Go to Settings on your Fly Memory Plus smartphone.

02: Now, Select From Settings option ->>>> About phone then Select ->>>> Software Information.

03: Now Scroll Down screen, and Tap the Build Number 7 to 10 times, on your Memory Plus, you will receive a message “Developer mode has been enabled”.

Now, you have successfully enabled USB debugging mode on Fly Memory Plus

Related Posts:

Note If anything goes wrong the author or getdroidpro.com is not responsible for it.

Leave a Reply

Your email address will not be published. Required fields are marked *