To Top

Allview Soul X5 Pro Enable Developer Option and USB Debugging

In this post, you will learn how to enable developer options and USB debugging on your Allview Soul X5 Pro. If you wanna connect your phone with a Computer or Laptop, make sure that USB debugging must be enabled on your Allview Soul X5 Pro. No doubt that enabling USB debugging was very easy in the previous version of Android devices. Here we will guide step by step, how to enable developer option and USB debugging on Soul X5 Pro.

Allview Soul X5 Pro Full Specifications

Allview Soul X5 Pro smartphone is powered by Android 8.1 (Oreo) which runs on GSM / HSPA / LTE technology. This device was released on 25 June 2018. The Latest Soul X5 Pro comes with 32GB internal memory with 4GB ram and device screen size is 6.2 inches, 96.9 cm2 (~82.8% screen-to-body ratio) and 1080 x 2246 pixels, 18.7:9 ratio (~402 ppi density) resolution.

The device comes with Dual: 16 Megapixels (f/2.0, PDAF) + 5 Megapixels (no AF, depth sensor), LED flash rear camera, and 16 Megapixels (f/2.0) selfie camera. Allview Soul X5 Pro is powered by Mediatek MT6771 Helio P60 chipset with Octa-core (4×2.0 GHz Cortex-A73 & 4×2.0 GHz Cortex-A53) CPU and GPU is Mali-G72 MP3.

The Allview Soul X5 Pro has a Non-removable Li-Po 3000 mAh battery and Connectivity options are Wi-Fi 802.11 a/b/g/n/ac, WiFi Direct, hotspot, 4.2, A2DP, LE bluetooth, A-GPS, GLONASS, GALILEO, 2.0, Type-C 1.0 reversible connector and sensors are Infrared face recognition, fingerprint (rear-mounted), accelerometer, gyro, proximity, compass.

Download Latest Allview Soul X5 Pro USB, Drivers

Allview Soul X5 Pro Secret Codes to unlock hidden features

How to enable developer mode in your Allview Soul X5 Pro

Today we will share with you very simple steps, you may easily enable or activate hidden developer mode using system settings on any Android device. You need to create a backup your Android device and save it in safe locations.

01: First, Go to settings ->>> select system settings. See the below image:

How to enable developer mode step 1 System settings

02: Now on your Allview Soul X5 Pro device jut Go to ->>> About Phone. See the below image:

step 2 click on about phone option

03: Now, Scroll down of screen, and find the Build Number your Allview Soul X5 Pro Press it 7 to 10 times. See the below image:

How to enable developer mode step 3 select Build number 7 to 10 times

04: After a few minutes Allview Soul X5 Pro Now, you will see this a pop-message: You are now a developer! See the below image:

How to enable developer mode

05: Now Click on ->>> Back Tap Button and you will see developer options under system settings. See the below image:

Turn on hidden developer options

We advise you that follow the steps carefully otherwise your Allview Soul X5 Pro turns off during enable developer mode option.

How to Enable USB debugging on Allview Soul X5 Pro

You can transfer your Soul X5 Pro all images, videos and, other documents to your Computer Using Enable USB debugging Mode Option.

01: Go to Settings on your Allview Soul X5 Pro smartphone .

02: Now, Select From Settings option ->>>> About phone then Select ->>>> Software Information.

03: Now Scroll Down screen, and Tap the Build Number 7 to 10 times, on your Soul X5 Pro, you will receive a message “Developer mode has been enabled”.

Now, you have successfully enabled USB debugging mode on Allview Soul X5 Pro

Related Posts:

Note If anything goes wrong the author or is not responsible for it.

Leave a Reply

Your email address will not be published. Required fields are marked *