Connect
To Top

Huawei nova 6 Enable Developer Option and Enable USB Debugging

In this post, you will learn how to enable developer options and USB debugging on your Huawei nova 6. If you wanna connect your phone with a Computer or Laptop, make sure that USB debugging must be enabled on your Huawei nova 6. No doubt that enabling USB debugging was very easy in the previous version of Android devices. But now enable USB debugging is too difficult on the latest phones. Here we will guide step by step, how to enable developer option and USB debugging on nova 6.

Download Latest Huawei nova 6 USB, Drivers

Huawei nova 6 Secret Codes to unlock hidden features

How to enable developer mode in your Huawei nova 6

Today we will share with you very simple steps, you may easily enable or activate hidden developer mode using system settings on any Android device. Please read carefully all steps and before doing anything else, you need to create a backup your Android phone.

Step 01: First of all, Go to settings ->>> select system settings. See the below image:

How to enable developer mode step 1 System settings

Step 02: Now on your Huawei nova 6 device jut Go to ->>> About Phone. See the below image:

step 2 click on about phone option

Step 03: After that, Scroll down of screen, and find the Build Number your Huawei nova 6 Press it 7 to 10 times. See the below image:

How to enable developer mode step 3 select Build number 7 to 10 times

Step 04: After a few minutes Huawei nova 6 Now, you will see this a pop-message: You are now a developer! See the below image:

How to enable developer mode

Step 05: Now Click on ->>> Back Tap Button and you will see developer options under system settings. See the below image:

Turn on hidden developer options

First of all, you must remember one thing, if your Huawei nova 6 turns off during the developer option. We always advise you that follow the above steps again to enable in your device.

How to Enable USB debugging on Huawei nova 6

You can transfer your nova 6 all images, videos and, other documents to your Computer Using Enable USB debugging Mode Option.

01: Go to Settings on your Huawei nova 6 smartphones.

02: Now, Select From Settings option ->>>> About phone then Select ->>>> Software Information.

03: After that, Scroll Down screen and, Tap the Build Number on your nova 6, now Tap the Build number 7 to 10 times, and you will see a message that says “Developer mode has been enabled”.

04: Then, scroll down your phone screen and turns on “USB debugging”. You will see the messages “Allow USB Debugging”, click “OK”.

Now, you have successfully enabled USB debugging mode on Huawei nova 6

Huawei nova 6 Full Specifications

Huawei nova 6 smartphone is powered by Android 10.0; EMUI 10 which runs on GSM / HSPA / LTE technology. This device was released on 19 December 2019. The Latest nova 6 comes with 128GB internal memory with 8GB ram and device screen size is 6.57 inches, 104.2 cm2 (~84.7% screen-to-body ratio) and 1080 x 2400 pixels, 20:9 ratio (~401 PPI density) resolution.
Huawei nova 6 is powered by HiSilicon Kirin 990 (7 nm) chipset with Octa-core (2×2.27 GHz Cortex-A76 & 6×1.88 GHz Cortex-A55) CPU and GPU is Mali-G76 MP16. The smartphone is coming with 40 Megapixel, f/1.8, 26mm (wide), 1/2.0″, 0.8�m, PDAF 8 Megapixel f/2.4, (ultrawide) 8 Megapixel, f/2.4, 27mm (wide), dedicated macro camera back camera, while front camera 32 Megapixel, f/2.0, 26mm (wide), 1/2.8″, 0.8�m 8 Megapixel, f/2.2, 17mm (ultrawide) is also awesome for selfie pictures. The Huawei nova 6 has a Non-removable Li-Po 4100 mAh battery and Connectivity options are Wi-Fi 802.11 a/b/g/n/ac, dual-band, Wi-Fi Direct, hotspot, 5.1, A2DP, LE Bluetooth, Yes, with dual-band A-GPS, GLONASS, BDS, GALILEO, QZSS, 2.0, Type-C 1.0 reversible connector, USB On-The-Go, and sensors are Fingerprint (side-mounted), accelerometer, gyro, proximity, compass.

Related Posts:

Note If you feel any trouble or see any mistake contact us in the below comment section. You can comment on us anytime about Huawei nova 6 if you have any problems during enabling USB debugging.
If anything goes wrong the author or getdroidpro.com is not responsible for it.

Leave a Reply

Your email address will not be published. Required fields are marked *