Oukitel K4000 USB Drivers How to Install ADB, CDC, VCOM Manually?


Full Review for Oukitel K4000

The latest Oukitel K4000 comes with 16GB with 2GB Ram, it is powered by Android OS, v5.1 LollyPop. The smartphone is 5.0 inches, 68.9 cm2 (~67.5% screen-to-body ratio) with 720 x 1280 pixels resolution and GSM / HSPA / LTE and battery has Non-removable Li-Po 4000 mAh battery. Oukitel K4000 has Quad-core 1 GHz Cortex-A53, MediaTek MT6735P, the rear camera is 8 Megapixels auto face recognition, LED flash and 2 Megapixels f/2.0 30fps. selfie. The device coming with a lot of features such as Wi-Fi 802.11 b/g/n, WiFi Direct, hotspot, 4.0 A2DP, LE, A-GPS, microUSB 2.0, USB, with Accelerometer, proximity, compass.
If you are using an Android phone and want to connect it with your PC, you need to download a USB driver for your Oukitel K4000. On this page, you can download the official USB drivers of your phone. Getdroidpro always guides you step by step. How to install a USB driver manually on your PC/Laptop. If you would like to know how to enable USB Debugging Mode on your Oukitel K4000? You can also check the secret codes of your Oukitel K4000. These secret codes will help you to find a lot of hidden features on your phone screen.

Oukitel K4000 CDC Driver for Flashing Firmware

Driver name: CDC Driver
Driver Size: 16.06KB

How to Install CDC Driver in your Computer?

Step 1: You need to download and extract the CDC driver on your desktop. See the below image:

CDC USB driver

Step 2: Now, open Device Manager –>>> Action –>>> Add Legacy Hardware. See the below image:

CDC Add Legacy Hardware

Step 3: Then, click the “Next” button under the Add legacy hardware wizard. To install CDC Driver on your Computer. See the below image:

CDC Add Hardware Wizard

Step 4: Now, select “Install the hardware that I manually select from the list (Advanced)” and click the Next button. See the below image:

CDC Install Hardware From List

Step 5: After successfully done, Show all devices, click the Next button, and select the extracted file from your computer. See the below image:

CDC Show All Devices

Step 6: Then, install new hardware by clicking the Next button to continue installing. See the below image:

VCOM Add Hardware

Step 7: Now, you will see a pop-up message “Install this driver software anyway” in the Windows security prompt window. If you would like to install, you need to click the correct option. See the below image:

CDC Windows security Prompt

Step 8: Finally, you have done successfully, click the Finish button to complete the installation. See the below image:
VCOM Complete Hardware Wizard
That’s it. Now You have successfully installed a CDC driver, and your device is now connected with your computer.

How to Install CDC Driver Video Tutorial?

If you don’t understand you may also check the below video to figure out.
Video Tutorial

Download VCOM Driver of your Oukitel K4000 for Flashing Firmware

Driver name: VCOM Driver
Driver Size: 12.25KB

How to Install VCOM Driver in your Computer?

On this page, you will learn how to install the VCOM USB Driver manually on your PC? Getdroidpro always helps you with every single step. You must read carefully to install professionally.
Step 1: First, download and extract VCOM USB Driver on your Computer or Laptop desktop to install easily. See the below image:

VCOM USB Driver

Step 2: Now, you should open Device Manager from your PC/Laptop >>> Action >>> Add Legacy Hardware. See the below image:

CDC Add Legacy Hardware

Step 3: Click the “Next” under the Add legacy hardware wizard. See the below image:

Add Hardware Wizard

Step 4: Now, Click “Install the hardware that I manually select from the below list (Advanced)” and continue installing by clicking the “Next” button. See the below image:

Install Hardware From List

Step 5: The Next step is to Show all devices, click the Next button, and select files from your computer. See the below image:

Show All Devices

Step 6: Then, select the “usb2ser_Win7” setup for the 32-bit operating system or select the “usb2ser_Win764” setup for the 64-bit operating system. See the below image:

VCOM Setup selection

Step 7: Now, click the “Next” to start installing your new hardware on your computer. See the below image:

VCOM Add hardware

Step 8: After that, Click “Install this driver software anyway” in the Windows security prompt window. See the below image:

CDC Windows security Prompt

Step 9: Next, click “Finish” to complete the installation. See the below image:

VCOM usb driver installation completed

You are done. Now VCOM driver is successfully installed on your computer.

How to install the VCOM Driver Video Tutorial?

If you would like to understand better, you must watch the below video Tutorial.
Video Tutorial

Oukitel K4000 ADB Driver for Normal Connecting

USB Driver name: ADB Driver
USB Driver Motive To connect your smartphone with a PC or Laptop.
USB Driver Size: 8.3 MB

How to Install ADB Driver Video Tutorial?

Video Tutorial

How to connect Oukitel K4000 with PC using ADB Driver

Here you will learn how to install ADB USB Driver on your laptop/PC step by step. If you didn’t understand the above video tutorial. You can follow the images, and we also attached a few images for your reference.
Step 01: First of all, you need to download the USB driver and extract it on your desktop, see the below image:

ADB Driver for Android 10

Step 02: Now, You should open Device Manager >>> Action >>> Add legacy hardware. See the below image:

Add Legacy Hardware

Step 03: After that, click the Next button to Add legacy hardware wizard. See the below image:

Add Hardware Wizard

Step 04: Now, You may choose “Install the hardware that I manually select from the list (Advanced)” and click the Next button. See the below picture:

Install Hardware From List

Step 05: After successfully done, Show all devices, click the Next button and you must select the extracted file manually from your computer. Please check the below image to get an idea:

Show All Devices

Step 06: Now, to start installing your new hardware, click the Next button again, check attached below image;

Install Android ADB Interface

Step 07: Click the Install in the Windows see the below image:

Windows Security

Step 08: Finally, you have done successfully, click the Finish button to complete the installation. See the below Image:

Navida Driver Installed done
Cool, you may enjoy your Android device is now connected with your Computer PC/laptop.

Free Download Oukitel K4000 Qualcomm Driver for Flashing Firmware

Driver name: Qualcomm Driver
Driver Size: 10.99MB

How to Install a Qualcomm Driver Video Tutorial?

Video Tutorial

Thank you so much for reading. We are here if you would like to ask anything else. We hope that you have understood everything else about CDC, VCOM, and ADB. Now you can install ADB USB driver, CDC USB Driver, and VCOM USB Driver on your Computer to connect your Oukitel K4000.

You May Also Like:

Oukitel K4000 USB Drivers and How to install on your PC

How to Enable USB Debugging Mode on your Oukitel K4000

Oukitel K4000 Secret Codes to unlock hidden features

How to install TWRP recovery On Oukitel K4000

Download SP Flash Tool for your Oukitel K4000

NOTE: We always suggest you before start installing USB Drivers on your PC/Laptop. You should create a backup of all your files and save them in a safe location. If anything goes wrong the author or getdroidpro.com is not responsible for it.

Leave a Comment

Your email address will not be published. Required fields are marked *