Connect
To Top

Motorola Moto Z Dual USB Drivers How to Install ADB, CDC, VCOM Manually?

 

Motorola Moto Z Dual Key Specs

Display Screen Size 5.5 inches, 83.1 cm2 (~72.0% screen-to-body ratio)
Resolution 1440 x 2560 pixels, 16:9 ratio (~535 ppi density)
Phone Memory 32GB
RAM 4GB
Primary Camera 13 Megapixels, f/1.8, laser autofocus, OIS, dual-LED dual-tone flash
Secondary Camera 5 Megapixels (f/2.2, 1.4 µm), LED flash, 1080p
Software
OS Android 6.0.1 (Marshmallow), 7.1.1 (Nougat), planned upgrade to Android 8.0 (Oreo)
Chipset Qualcomm MSM8996 Snapdragon 820
CPU Quad-core (2×2.15 GHz Kryo & 2×1.6 GHz Kryo) – USA Quad-core (2×1.8 GHz Kryo & 2×1.6 GHz Kryo) – Global
GPU Adreno 530
Sensors Fingerprint (front-mounted), accelerometer, gyro, proximity, compass
Battery Non-removable Li-Ion 2600 mAh battery

If you are using an Android phone and wanna to connect it with your PC/Laptop you must download usb driver for your Motorola Moto Z Dual. In this page you can download official USB drivers of your phone. Getdroidpro always guide you step by step. How to install usb driver manually on your PC/Laptop. If would you like to know how to enable USB Debugging Mode on your Motorola Moto Z Dual. You can also check secret codes of your Motorola Moto Z Dual. These codes will help you to check different features on your phone screen secret codes.

Motorola Moto Z Dual CDC Driver for Flashing Firmware

Deiver name: CDC Driver
Driver Size: 16.06KB

How to install CDC Driver in your Computer full guide

Step 1: You should download and extract CDC driver on your desktop. (See Image 01 below)

Step 2: Now, open Device Manager –>>> Action –>>> Add Legacy Hardware. (See Image 02 below)

Step 3: Then click the “Next” button under the Add legacy hardware wizard. To install CDC Driver on your Computer. (See Image 03 below):

Step 4: Now select “Install the hardware that I manually select from the list (Advanced)” and click the Next Button. (See Image 04 below)

Step 5: After successfuly done, Show all devices, click the Next button and select the extracted file from your computer. (See Image 05 below)

Step 6: Then install new hardware by clicking the Next button to continue installing. (See Image 06 below):

Step 7: Now you will see a pop-up message “Install this driver software anyway” in the Windows security prompt window. If would you like to install Please Click correct option. (See Image 07 below)

Step 8: Finally you have done successfully, click the Finish button to complete installation (See Image 08 below)

That’s it. Now You have successfully install CDC driver and your device is now connected with your computer.

How to install CDC Driver Video Tutorial?

If you don’t understand you may also check below video to figure out.

Download VCOM Driver of your Motorola Moto Z Dual for Flashing Firmware

Deiver name: VCOM Driver
Driver Size: 12.25KB

How to install VCOM Driver in your Computer full guide

In this page you will learn how to install VCOM USB driver on your Laptop/PC manually. Getdroidpro always help you on every single step, read carefully to install professionally.
Step 1: First download and extract VCOM USB driver on your Computer or Laptop desktop to install easily. (See below image)

Step 2: Now you should open Device Manager from your PC/Laptop >>> Action >>> Add Legacy Hardware. (See below image)

Step 3: Click the “Next” under the Add legacy hardware wizard. (See below image)

Step 4: Now Click “Install the hardware that I manually select from the below list (Advanced)” and continue installing by clicking the “Next” Button. (See below image)

Step 5: Next step is Show all devices, click the Next button and select file from your computer. (See below image)

Step 6: Then, select “usb2ser_Win7” setup for 32 bit operating system or select “usb2ser_Win764” setup for 64 bit operating system. (See below image)

Step 7: Now, click the “Next” to start installing your new hardware on your computer. (See below image)

Step 8: After that Click “Install this driver software anyway” in the Windows security prompt window. (See below image)

Step 9: Next, click “Finish” to complete installation. (See below image)

You are done. Now VCOM driver is successfully installed on your computer.

How to install VCOM Driver Video Tutorial?

If you would like to understand better, you must watch the below video Tutorial.

Motorola Moto Z Dual ADB Driver for Normal Connecting

USB Deiver name: ADB Driver
USB Driver Motive To connect your smartphone with PC or Laptop.
USB Driver Size: 8.3 MB

How to connect Motorola Moto Z Dual with PC using ADB Driver

Here you will learn how to install ADB USB driver on your laptop/PC step by step. If you didn’t understand above video tutorial you can follow the images and instruction, step by step. We also attached few images for your reference.
Step 01: First of all you must download the USB driver and extract it on your desktop, see Image below:

Step 02: Now, You should open Device Manager >>> Action >>> Add legacy hardware. See attached picture.

Step 03: After that click the Next button see below image, in the Add legacy hardware wizard.

Step 04: Now You may choose “Install the hardware that I manually select from the list (Advanced)” and click the Next Button see below picture.

Step 05: After successfuly done, Show all devices, click the Next button and you must select the extracted file manually from your computer. Please check the below image to get an idea:

Step 06: Now to start installing your new hardware, click the Next button again, check attached below image;

Step 07: Click the Install in the Windows please see below image

Step 08: Finally you have done successfully, click the Finish button to complete installation (see below image)


Cool, you may enjoy your Android device is now connected with your Computer PC/laptop.

Free Download Motorola Moto Z Dual Qualcomm Driver for Flashing Firmware

Deiver name: Qualcomm Driver
Driver Size: 10.99MB

How to install ADB Driver Video Tutorial?

Video Tutorial
Thank you so much for reading, We are here if would you like to ask anything else. We hope that you have understood everything else about CDC, VCOM and ADB. Now you can install ADB USB driver, CDC USB Driver and VCOM USB Driver on your Computer to connect your Motorola Moto Z Dual.

Read More:

Motorola Moto Z Dual USB Drivers and How to install on your PC

How to Enable USB Debugging Mode on your Motorola Moto Z Dual.

Motorola Moto Z Dual Secret Codes to unlock hidden features

How to install TWRP recovery On Motorola Moto Z Dual

Download SP Flash Tool for your Motorola Moto Z Dual

NOTE: We always suggest you before start installing USB Drivers on your PC/Laptop. You should create a backup of your all your files and save on safe location. If anything goes wrong the author or getdroidpro.com are not responsible for it.

Leave a Reply

Your email address will not be published. Required fields are marked *