Connect
To Top

Motorola Moto G6 Plus USB Drivers How to Install ADB, CDC, VCOM Manually?

Full Review for Motorola Moto G6 Plus

The latest Motorola Moto G6 Plus comes with 32GB with 3GB Ram, it is powered by Android 8.0 (Oreo). The smartphone is 5.9 inches, 89.8 cm2 (~74.4% screen-to-body ratio) with 1080 x 2160 pixels, 18:9 ratio (~409 ppi density) resolution and GSM / HSPA / LTE and battery has Non-removable Li-Ion 3200 mAh battery. Motorola Moto G6 Plus has Octa-core 2.2 GHz Cortex-A53, Qualcomm SDM630 Snapdragon 630, the rear camera is Dual 12 Megapixels, f/1.7, dual pixel PDAF + 5 Megapixels, f/2.2, depth sensor and 8 Megapixels, f/2.2. selfie. The device coming with a lot of features such as Wi-Fi 802.11 a/b/g/n/ac, dual-band, WiFi Direct, hotspot, 5.0, A2DP, LE, EDR, A-GPS, GLONASS, GALILEO, BDS, 2.0, Type-C 1.0 reversible connector, with Fingerprint (front-mounted), accelerometer, gyro, proximity, compass.
If you are using an Android phone and want to connect it with your PC, you need to download a USB driver for your Motorola Moto G6 Plus. On this page, you can download the official USB drivers of your phone. Getdroidpro always guides you step by step. How to install a USB driver manually on your PC/Laptop. If you would like to know how to enable USB Debugging Mode on your Motorola Moto G6 Plus? You can also check the secret codes of your Motorola Moto G6 Plus. These secret codes will help you to find a lot of hidden features on your phone screen.

Motorola Moto G6 Plus CDC Driver for Flashing Firmware

Driver name: CDC Driver
Driver Size: 16.06KB

How to Install CDC Driver in your Computer?

Step 1: You need to download and extract the CDC driver on your desktop. See the below image:

Step 2: Now, open Device Manager –>>> Action –>>> Add Legacy Hardware. See the below image:

Step 3: Then, click the “Next” button under the Add legacy hardware wizard. To install CDC Driver on your Computer. See the below image:

Step 4: Now, select “Install the hardware that I manually select from the list (Advanced)” and click the Next button. See the below image:

Step 5: After successfully done, Show all devices, click the Next button, and select the extracted file from your computer. See the below image:

Step 6: Then, install new hardware by clicking the Next button to continue installing. See the below image:

Step 7: Now, you will see a pop-up message “Install this driver software anyway” in the Windows security prompt window. If you would like to install, you need to click the correct option. See the below image:

Step 8: Finally, you have done successfully, click the Finish button to complete the installation. See the below image:

That’s it. Now You have successfully installed a CDC driver, and your device is now connected with your computer.

How to Install CDC Driver Video Tutorial?

If you don’t understand you may also check the below video to figure out.
Video Tutorial

Download VCOM Driver of your Motorola Moto G6 Plus for Flashing Firmware

Driver name: VCOM Driver
Driver Size: 12.25KB

How to Install VCOM Driver in your Computer?

On this page, you will learn how to install the VCOM USB Driver manually on your PC? Getdroidpro always helps you with every single step. You must read carefully to install professionally.
Step 1: First, download and extract VCOM USB Driver on your Computer or Laptop desktop to install easily. See the below image:

Step 2: Now, you should open Device Manager from your PC/Laptop >>> Action >>> Add Legacy Hardware. See the below image:

Step 3: Click the “Next” under the Add legacy hardware wizard. See the below image:

Step 4: Now, Click “Install the hardware that I manually select from the below list (Advanced)” and continue installing by clicking the “Next” button. See the below image:

Step 5: The Next step is to Show all devices, click the Next button, and select files from your computer. See the below image:

Step 6: Then, select the “usb2ser_Win7” setup for the 32-bit operating system or select the “usb2ser_Win764” setup for the 64-bit operating system. See the below image:

Step 7: Now, click the “Next” to start installing your new hardware on your computer. See the below image:

Step 8: After that, Click “Install this driver software anyway” in the Windows security prompt window. See the below image:

Step 9: Next, click “Finish” to complete the installation. See the below image:

You are done. Now VCOM driver is successfully installed on your computer.

How to install the VCOM Driver Video Tutorial?

If you would like to understand better, you must watch the below video Tutorial.
Video Tutorial

Motorola Moto G6 Plus ADB Driver for Normal Connecting

USB Driver name: ADB Driver
USB Driver Motive To connect your smartphone with a PC or Laptop.
USB Driver Size: 8.3 MB

How to Install ADB Driver Video Tutorial?

Video Tutorial

How to connect Motorola Moto G6 Plus with PC using ADB Driver

Here you will learn how to install ADB USB Driver on your laptop/PC step by step. If you didn’t understand the above video tutorial. You can follow the images, and we also attached a few images for your reference.
Step 01: First of all, you need to download the USB driver and extract it on your desktop, see the below image:

Step 02: Now, You should open Device Manager >>> Action >>> Add legacy hardware. See the below image:

Step 03: After that, click the Next button to Add legacy hardware wizard. See the below image:

Step 04: Now, You may choose “Install the hardware that I manually select from the list (Advanced)” and click the Next button. See the below picture:

Step 05: After successfully done, Show all devices, click the Next button and you must select the extracted file manually from your computer. Please check the below image to get an idea:

Step 06: Now, to start installing your new hardware, click the Next button again, check attached below image;

Step 07: Click the Install in the Windows see the below image:

Step 08: Finally, you have done successfully, click the Finish button to complete the installation. See the below Image:


Cool, you may enjoy your Android device is now connected with your Computer PC/laptop.

Free Download Motorola Moto G6 Plus Qualcomm Driver for Flashing Firmware

Driver name: Qualcomm Driver
Driver Size: 10.99MB

How to Install a Qualcomm Driver Video Tutorial?

Video Tutorial

Thank you so much for reading. We are here if you would like to ask anything else. We hope that you have understood everything else about CDC, VCOM, and ADB. Now you can install ADB USB driver, CDC USB Driver, and VCOM USB Driver on your Computer to connect your Motorola Moto G6 Plus.

You May Also Like:

Motorola Moto G6 Plus USB Drivers and How to install on your PC

How to Enable USB Debugging Mode on your Motorola Moto G6 Plus

Motorola Moto G6 Plus Secret Codes to unlock hidden features

How to install TWRP recovery On Motorola Moto G6 Plus

Download SP Flash Tool for your Motorola Moto G6 Plus

NOTE: We always suggest you before start installing USB Drivers on your PC/Laptop. You should create a backup of all your files and save them in a safe location. If anything goes wrong the author or getdroidpro.com is not responsible for it.

Leave a Reply

Your email address will not be published. Required fields are marked *