Today, here we will guide you on how to root your Allview V2 Viper e using Magisk. In this method, you don’t need to TWRP of your device. It is a very simple and easy method, for everyone. We must recommend you please read the following steps carefully. If you don’t understand the below steps we also shared with you a video tutorial.
If you know about “Rooting” then, it is very easy, and you will root your Android device easily. A Lot of people don’t know about this. As you know that Android is an open-source OS that allows you to navigate your device as much as you can. You can do a lot of different things if the phone is rooted using Magisk Root. You may get access and control a lot of features such as a clock, access to the cache. You can also remove unwanted software from your Android V2 Viper e. If your device is rooted then, you can run a firewall, enable a secure system on your device manually. Not only these but also you may back up your system, and a lot of different useful tweaks to get access. In this post, we will show you how to root Allview V2 Viper e.
WHAT IS ROOTING?
Rooting is the process of allowing users of smartphones, tablets, and other devices running the Android mobile operating system to attain privileged control over various Android subsystems. As Android uses the Linux kernel, rooting an Android device gives similar access to administrative permissions as on Linux or any other Unix-like operating system such as FreeBSD or macOS [Source].
Now, we will guide you step by step, first of all, you will use the Magisk by patching the official stock boot image, and the flash on Allview V2 Viper e boot partition. You must need to download the patched image file from Magisk Manager and flash it. A Lot of people don’t know and they compare rooting with hacking. Here we would like to clear you that rooting is a different thing and hacking different things. No doubt that someone may control and break any system using hacking that is illegal while rooting is done by the owner of an V2 Viper e to get different features and advantages of the device.
How to Root Android With Magisk Without PC?
Quick Steps To Root Allview V2 Viper e Using Magisk
Just Remember I just want to warn you that, Rooting will void the warranty of your smartphone
Rooting will block the OTA updates
First of all, please check your device is charged more than 70%.
Please create a backup of your Android device before begin rooting.
This image file is only for Allview V2 Viper e. Do not use it on any other Android device.
You need to connect the computer with a micro USB cable.
Finally, please check that you have downloaded all the required files on your computer.
Download ADB and Fastboot files. (Windows/MAC)
Download And Install V2 Viper e USB Drivers.
Download Other Drivers: Mediatek VCOM Drivers or MTK USB Drivers
Download Latest Allview V2 Viper e Stock ROM
Download And Install SP Flash tool on your PC
How to Root Any Android Device without TWRP Recovery?
Disclaimer: We are at Getdroidpro will not be responsible for any bricking/damage to your phone while installing this ROM.
Quick Steps How to Extract and Patch Boot.image with Magisk?
First of all, please download and extract the ROM from your computer.
Please connect your V2 Viper e using a micro USB cable, and copy only the boot.img file from the extracted folder to your Allview V2 Viper e device storage.
Now you need to Launch Magisk Manager. After that, you will see a popup window that will ask you to install Magisk.
Finally please select INSTALL and choose to install it again.
Now Please press on “Patch Boot Image File”.
Navigate to internal storage and select your phone’s boot image that you transferred earlier.
Wait for a couple of seconds. Magisk will start patching the boot image.
Once the boot image has been patched, copy the “patched_boot.img” from the internal storage and replace it in the same extracted ROM folder on your PC.
Now you can follow the second step to flash the patched boot image file.
How To Install the Patched Boot Image on Allview V2 Viper e
Follow the given link to install Patched Boot Image on Allview V2 Viper e:
We assume that you have already downloaded the ADB & Fastboot tool from the link given above.
Now, extract the ADB fastboot tool, then move the patched boot image to the same folder.
Hold the Shift key and right-click on the mouse to open the command window/PowerShell.
Next, enter the following command:
Flash the “patched_boot.img” to install Magisk and root your Android device: fastboot flash boot patched_boot.img
For devices with A/B partition system, use the following commands: fastboot flash boot_a patched_boot.img
fastboot flash boot_b patched_boot.img
Please replace [patched_boot.img] with the name of the boot image file you downloaded followed by the .img extension.
The flashing process will begin. Once done, run fastboot reboot
How to Verify if your phone has a systemless root?
Download and install the Magisk Manager app APK, and launch it.
To verify that you have a systemless root, check the top of the screen and if you see all options with Green Tick which means you have successfully rooted and bypassed SafetyNet.
So, that’s it. Now that you have rooted your Allview V2 Viper e. If you have any queries regarding this, do let us know.
You May Also Like:
- How to install USB Drivers on Allview V2 Viper e
- How to Enable USB Debugging Mode on your Allview V2 Viper e
- Secret Codes of your Allview V2 Viper e
- How to Root your Allview V2 Viper e without using PC/Laptop
- How to install Custom TWRP Recovery on your Allview V2 Viper e
- Download SP Flash Tool for Allview V2 Viper e
Allview V2 Viper e Specs & Review
Allview V2 Viper e comes with 8GB internal memory with 1GB Ram. It is powered by Android 5.1 (Lollipop), it has powerful Quad-core 1.3 GHz Cortex-A7 CPU and Mediatek MT6580 chipset. The smartphone comes with 4.5 inches, 55.8 cm2 (~64.1% screen-to-body ratio) with 480 x 854 pixels, 16:9 ratio (~218 ppi density) resolution, and Removable Li-Ion 1850 mAh battery.
Allview V2 Viper e comes primary camera is 5 Megapixels autofocus, LED flash, and secondary camera is 2 Megapixels. It has different sensors such as Accelerometer, proximity, compass. The latest Allview V2 Viper e coming with a lot of different features such as Wi-Fi 802.11 b/g/n, hotspot, 4.0, A2DP, EDR, A-GPS, microUSB 2.0.
Allview was announced their latest V2 Viper e smartphone . It is powered by Android 5.1 (Lollipop), which is run on GSM / HSPA / 2G / 3G technology, this device was announced on 10 April 2016, and the release date of the device is 15 April 2016. The latest device consists on Dual SIM. V2 Viper e comes with a 4.5 inches display with IPS LCD capacitive touchscreen, 16M colors, and 480 x 854 pixels resolution.
Note: You can comment on us anytime about Allview V2 Viper e if you have any problems while rooting. If anything goes wrong the author or getdroidpro.com is not responsible for it.